Install

BLAZE instructiosn are now up at http://www.youtube.com/user/beakerconcepts

PATENT PENDINGbeakerconcepts.comsecond pic of h.5c(cervelo) in B/W
here next to below picYour HydroTail is guaranteed to be free of defect or breakage for a period of 1 year.This packaging’s pictures are the correct mounting configurations, any
different mounting options are not recommended.Using the longer Hex bolts/locking nuts supplied, anchor them thru
the 2 rear holes of the Cervelo Carbon seat post. Bolts should be tight
Step one is the same as both the Carbon HydroTail and the H.5H.5c (cervelo Mount)follow Steps 2 and 3 to attach the H.5 as described for the Carbon HydroTailOn the H.5 and H.5c units, all holes are threaded so step 1 is to mount the cages
using the supplied bolts. Grease all boltsH.5 Aluminum HydroTail InstructionsRepeat step 2 on the opposite side of the saddle. You will may need to spread the device
to fit...this is normal.Mount device to the saddle rails by using one clamp per side. Attach one hex nut bolt
through the top hole of the device into the thread section of the clamp-use grease on all
threaded parts. Repeat procedure on the opposite side of the seat rail.Using needle nose pliers and a 4m hex wrench, attach cage(s) to the device
Carbon HydroTail Instructions
Each HydroTail is supplied with all the hardware to make you faster and more efficient.
Each hex bolt comes with a matching locking nut (carbon unit/ H.5c mounts) that prevent
the cages from rattling loose. The attachment fittings for mounting your HydroTail
(carbon and H.5) offer 2 and 3 clamping positions to accommodate most saddles. The H.5c
is tailored to fit the newer style Cervelo(R) 2 bolt carbon seat post found on the P2,P3 and P4
frames.

It is recommended that the cages be attached to the HydroTail off the bike and before mounting
the saddle or mounting on the Cervelo seat post.